- When loading electrode pastes, you must grasp the center of gravity of the trolley, the loading capacity of the trolley is not allowed to be overloaded,When moving electrode pastes, handle them with care to avoid squeezing or hurting your hands or feet,no one is allowed to pass under the trolley.
- When crushing the electrode paste, you must wear protective glasses. When transporting, loading and unloading the electrode paste, it must be placed stably to prevent slipping and injury.
3. When adding electrode paste to the electrode shell, you must wear a mask and do not touch the two-phase electrode shell to prevent electric shock. When welding the electrode shell, it must be welded by professionals. Hands and metal conductors are not allowed to touch the two-phase electrodes at the same time to prevent short circuit or electric shock accidents.
4. When using portable lighting fixtures, only use low voltage. If the wire is found to be damaged, it must be replaced immediately.
5. When using an electric hoist to lift electrode pastes, you should first check that the electric hoist has no faults and hidden dangers, and then use it after confirming that it is correct. No one is allowed nearby during operation to prevent the electrode paste from falling and injuring people.
6. When pouring electrode pastes, the trolley should be fixed first to prevent the trolley from sliding and hurting people.
7. Protective oil should be applied before work to avoid poisoning
8. Keep track of electrode sintering conditions to prevent premature sintering
9. When measuring the height of the electrode paste column, do not use conductors to avoid electric arcing.
Safety is a collective responsibility. By following these guidelines, we can ensure a secure workplace and protect our workers.
